Sweeper 1.00 
------------
by Grekim Jennings


Sweeper is a program to test the frequency response of your room.


Features:
---------

- Adjustable Q, number of bands, starting frequency, and sweep length.  

- Ending frequency is calculated automatically

- Analysis is printed to the screen in tab separated columns for import into a 
spreadsheet.

- Data is also printed to a file called sweep_out.txt.  
(Note: Data will be continually appended, so periodically delete this file 
unless you want to keep all the data.)

- Several presets are included.


Setup:
------

Connect a line OUT of channel 2 of your audio interface to the line IN of
channel 2.  Be sure to avoid any feedback loops by disabling any monitoring.
This loop in channel 2 serves to sync input and output.

Plug your test microphone into channel 1 input.

Connect the output of channel 1 to a mixer or splitter to feed your amp and 
speakers.

BE SURE TO TURN YOUR AMPLIFIER OR MIXER TO A LOW SETTING BEFORE USING THIS 
PROGRAM!  This is very important to do until you get a feel for how loud the 
output is.  The output signal is a -6 dBFS sine wave that sweeps through your 
chosen bandwidth.

Run the program in the command terminal.