Signal Path:
------------

In traditional terms, all the effects except reverb are pre-fader inserts 
meaning, for example, changing the volume of a channel will not effect the 
level the compressor is responding to.  The reverb is post-fader so that as you
turn down a channel volume its reverb level will decrease also. 	

The mixer is "wired" as follows when not using effects:

(1) file source
(2) trim/scale
(3) volume and pan
(4) accumulator

With reverb patched in, the signal is sent to both the reverb and the 
accumulator:

(1) file source
(2) trim/scale
(3) volume and pan
(4) reverb send lvl
(5) reverb
(6) reverb return lvl
(7) accumulator.
                                          
With all effects patched in:

(1) file source
(2) high pass filter
(3) parametric EQ
(4) rms compression
(5) peak compression
(6) limiter
(7) fx makeup gain
(8) trim/scale 
(9) volume 
(10) reverb
(11) accumulator
(12) master vol
(13) master fx